Warenkorb

GEN4-4DPI-43CT-CLB

4D SYSTEMS GEN4-4DPI-43CT-CLB

Abbildung kann vom Original abweichen

4D SYSTEMS

4.3 480x272 gen4 RaspberryPi
Hersteller: 4D SYSTEMS
Matchcode: GEN4-4DPI-43CT-CLB
Rutronik No.: DISMON1346
VPE: 1
MOQ: 1
Verpackung: INDIVIDUAL
Auf Anfrage
55,08 $
55,08 $

4.3 480x272 gen4 RaspberryPi Beschreibung

4.3" Gen4 Primary Display for the Raspberry Pi & ASUS Tinker Board - Capacitive Touch

The gen4-4DPi range are Primary Display’s for the Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi Zero and Pi Zero W & ASUS Tinker Board, which display the primary output of the Raspberry Pi & ASUS Tinker Board, like what is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel or Capacitive Touch panel, enabling the gen4-4DPi to function with the Raspberry Pi & ASUS Tinker Board without the need for a mouse.

Communication between the gen4-4DPi and the Raspberry Pi & ASUS Tinker Board is interfaced with a high speed 48Mhz SPI connection, which utilises an on-board processor for direct command interpretation and SPI communication compression, and features a customised DMA enabled kernel. This combination allows this display to output high frame rate compared to other SPI display solutions, when displaying a typical image/video, and can achieve higher depending if the image can be compressed.

The gen4-4DPi is designed to work with the Raspbian Operating System running on the Raspberry Pi & ASUS Tinker Board, as that is the official Raspberry Pi & ASUS Tinker Board operating system. It is also compatible with Pixel and Scratch.

The gen4-4DPi range connects to the Raspberry Pi & ASUS Tinker Board’s 40 pin header using the gen4-4DPi Adaptor, which then connects to the gen4-4DPi display module using a 30-way FFC Cable.

Mounting of the gen4-4DPi is achieved with the 4x4mm mounting holes present on the Resistive Touch Display Modules, enabling standard screws to fasten the Gen4-4DPi as required, or via the adhesive supplied on the Cover Lens Bezel which is part of the Capacitive Touch Version.

Parameter

Bildschirmgröße
4.3 inch
Auflösung
480x272 pixel
Helligkeit
475 cd/m²
Farben
65K RGB
Kontrast
N/A
Breite
84.5 mm
Tiefe
9.5 mm
Anschluß (Interface)
N/A
Backlight Sys.
LED
Bertriebs Temperatur
-20 - +70 °C
Bildschirmart
LCD TFT
TFT with Touch.
YES
TFT Steckanschluss
30 way FPC
Automotive
NO
Bleifrei Definition
10
Verpackung
INDIVIDUAL
Höhe
123 mm
Zolltarifnummer
85489090650
Land
Australia
Lieferzeit beim Hersteller
8 Wochen
Die Artikel im Warenkorb können Sie verbindlich bestellen, oder - falls Sie weitere Fragen haben - als unverbindliche Anfrage an uns schicken.

Passwort vergessen?