Warenkorb

BLUENRG-MSCSP

ST BLUENRG-MSCSP

Abbildung kann vom Original abweichen

ST

BlueNRG-MS BT4.1 network proces
Hersteller: STMicroelectronics
Matchcode: BLUENRG-MSCSP
Rutronik No.: BTOOTH1496
VPE: 2500
MOQ: 2500
Package: WLCSP34
Verpackung: REEL
Auf Anfrage
2,25 $
5.625,00 $

BlueNRG-MS BT4.1 network proces Beschreibung

The BlueNRG-MS is a very low power Bluetooth low energy (BLE) single-mode network processor, compliant with Bluetooth specification v4.1. The BlueNRG-MS supports multiple roles simultaneously, and can act at the same time as Bluetooth Smart sensor and hub device.

The Bluetooth Low Energy stack runs on the embedded ARM Cortex-M0 core. The stack is stored on the on-chip non-volatile Flash memory and can be easily upgraded via SPI. The device comes pre-programmed with a production-ready stack image (whose version could change at any time without notice). A different or more up-to-date stack image can be downloaded from the ST web site and programmed on the device through the ST provided software tools.

The BlueNRG-MS allows applications to meet of the tight advisable peak current requirements imposed with the use of standard coin cell batteries. The maximum peak current is only 10 mA at 1 dBm of output power. Ultra low-power sleep modes and very short transition times between operating modes allow very low average current consumption, resulting in longer battery life. The BlueNRG-MS offers the option of interfacing with external microcontrollers using SPI transport layer.

Key Features

  • Bluetooth specification v4.1 compliant master and slave single-mode Bluetooth low energy network processor
  • Embedded Bluetooth low energy protocol stack: GAP, GATT, SM, L2CAP, LL, RF-PHY
  • Bluetooth low energy profiles provided separately
  • Operating supply voltage: from 1.7 to 3.6 V
  • 8.2 mA maximum TX current (@0 dBm, 3.0 V)
  • Down to 1.7 µA current consumption with active BLE stack
  • Integrated linear regulator and DC-DC step-down converter
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent RF link budget (up to 96 dB)
  • Accurate RSSI to allow power control
  • Proprietary application controller interface (ACI), SPI based, allows interfacing with an external host application microcontroller
  • Full link controller and host security
  • High performance, ultra-low power Cortex-M0 32-bit based architecture core
  • Upgradable BLE stack (stored in embedded Flash memory, via SPI)
  • AES security co-processor
  • Low power modes
  • 16 or 32 MHz crystal oscillator
  • 12 MHz ring oscillator
  • 32 kHz crystal oscillator
  • 32 kHz ring oscillator
  • Battery voltage monitor
  • Compliant with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15, ARIB STD-T66
  • Available in QFN32 (5 x 5 mm) and WLCSP34 (2.66 x 2.56 mm) packages
  • Operating temperature range: -40 °C to 85 °C


Parameter

Bluetooth spec.
V4.1
Profil
N Y/N
interne Antenne
N Y/N
Länge
5 mm
Breite
5 mm
Betriebsspannung
2,0-3,6 V
Bertriebs Temperatur
-40 / +85 °C
Automotive
NO
Gehäuse
WLCSP34
Bleifrei Definition
RoHS-conform
Verpackung
REEL
Zolltarifnummer
85423990000
Land
Taiwan
ABC-Schlüssel
A
Lieferzeit beim Hersteller
29 Wochen
Die Artikel im Warenkorb können Sie verbindlich bestellen, oder - falls Sie weitere Fragen haben - als unverbindliche Anfrage an uns schicken.

Passwort vergessen?